df banner

Direct Fired Melting Kettles (DF)

Crack Sealing and Waterproofing

Request A Qoute

Models

Tank Capacity Burner Type Frame Type
10 Gallons Propane Portable

Models

Tank Capacity Burner Type Frame Type
10 Gallons Propane Portable

DF10W

Overview

BEST SELLER
DF10W

*Custom Paint Colour

DF10W

Portable

10 Gallons

The 10 gallon unit is mounted on steel wheels and is equipped with a spring loaded hand release valve for easy release of material. This unit comes equipped with a material temperature gauge, 80,000 BTU propane burner, propane hose with regulator and steel shoe for striking off sealant in a uniform width.

FEATURES

LIST OF ADD-ON OPTIONS

Vapour propane regulator gauge

08-1157

Vapour Propane Regulator Gauge
Vapour propane regulator

08-1151

Vapour Propane Regulator
80,000 BTU 12 inches Hand torch with mounting bracket - Stainless Orifice

08-1139

80,000 BTU 12” Hand Torch w Mounting Bracket and Stainless Orifice
12 inches Material thermometer that reads between 50 degrees fahrenheit to 550 degrees fahrenheit

04-0212

12" Material Thermometer (50°F - 550°F)
Burner orifice for 80,000 BTU burner

08-1072

Burner Orifice for 80,000 BTU Burner
1-inch Bronze dispensing valve for the DF10W

03-2301

1" Bronze Dispensing Valve
48-inch Propane hose

15-1048

48" Propane Hose

Projects

Right Seal Inc Residential Crack Filling

Location: Hamilton, ON, Canada

Equipment Used: UCMK370DT, DF10W and CR300K

Right Seal Inc parked their UCMK370DT at the side of the road
Right Seal Inc parked their UCMK370DT at the side of the road.

Right Seal Inc. is a full-service pavement maintenance operation with expertise in all fields of the industry, including but not limited to crack routing and filling, asphalt sealing, catch basins and line marking.

We joined Right Seal at a residential job site that was commissioned by a homeowner's association. The job consisted of crack routing and crack sealing on the residential streets within a neighborhood. The equipment being used included Marathon's UCMK370DT, DF10W and CR300K. Additionally the crew was using blowers, torches, and a backpack sprayer to apply Glenzoil.

The job started with the crew routing out the designated cracks. This was done quickly using their Marathon CR300K router, navigating the cracks using the router's guidance pin and the operator's experience with the equipment.

Closely behind the routing operator was a crew member with a backpack blower, blowing out the routed cracks to clean them. This step can also be completed with a walk behind blower such as a Billy Goat.

Right Seal crew member is using a backpack blower to remove debris from the routed crack

Once the cracks had been routed and blown clean, it was time for the crack sealing to start. Prior to arriving at the job site, the crew had heated their UMCK370DT and filled it with the appropriate crack filling product such as Maxwell 410. This meant that once the preparation steps were complete the material was immediately ready to be dispensed from the UCMK370DT into their multiple DF10W units using the 2' Gravity pour valve at the back of the machine.

Each DF10W holds approximately 10 gallons of rubber that allows the user to maneuver the job site safely and quickly, applying material into the drag shoe that then evenly spreads the product with an overband into the routed cracks.

The final step was for a crew member to walk along all of the sealed cracks with a backpack sprayer, applying a generous spray of Glenzoil to ensure the hot sealant would be safe for traffic both vehicle and pedestrians within 20 minutes of application.

Right Seal crew member is using a backpack sprayer to apply hot sealant

DF10W

Tank Capacity 10 Gallons
Burner Type Propane
Frame Type Portable

Current Tab: Overview