tps banner

Tube Fired Hot Tack Sprayers (TPS)

Tack Emulsion Sprayers

Request A Qoute

Models

Tank Capacity Burner Type Frame Type
115 Gallons Propane Skid Mount

Models

Tank Capacity Burner Type Frame Type
115 Gallons Propane Skid Mount

TPS115PS

Overview

BEST SELLER
TPS115PS

*Custom Paint Colour

TPS115PS

Skid Mount

115 Gallons

Marathon's hot tack sprayers provide a fast and reliable means of heating and applying bituminous emulsions and tack coats. Our units are capable of heating a large volume of bitumen on a steady basis and offer many operator friendly features and options.

FEATURES

LIST OF ADD-ON OPTIONS

6-inch Material thermometer that reads between 50 to 550 degrees Fahrenheit

04-0206

6" Material Thermometer (50F - 550F)
36-inch Propane hose

15-1036

36" Propane Hose
Vapour propane regulator gauge

08-1157

Vapour Propane Regulator Gauge
Vapour propane regulator

08-1151

Vapour Propane Regulator
2-inch Molasses valve

03-0032

2" Molasses Valve
5030 Brass spray nozzle

03-2053

5030 Brass Spray Nozzle
50-feet by Half an inch black emulsion hose

15-3055

50\' x 1/2" Black Emulsion Hose
80,000 BTU Vapour propane burner with stand

08-1121

80,000 BTU Vapour Propane Burner w/Stand
1/2 an inch by 100 feet Heavy duty hand crank hose reel

03-0005

1/2" x 100\' Heavy Duty Hand Crank Hose Reel
72 inches Propane hose

15-1072

72" Propane Hose

Projects

Action Paving Tack Spraying Case Study

Location: South-Central New Jersey, USA

Equipment Used: TPS250PT

Action Paving Employee is operating the TPS250PT to spray asphalt emulsion on a milled parking lot.
Action Paving Employee is operating the TPS250PT to spray asphalt emulsion on a milled parking lot.

Action Paving is a professional Paving Company located in South-Central New Jersey. The Stanley family began serving customers in the early 1950's installing asphalt driveways and parking lots within their community. With over 50 + years of paving experience, Action Paving still provides the same professional service and quality craftsmanship to its customers and tackles jobs of all sizes, from potholes to parking lots, to large commercial paving jobs.

Action Paving was recently doing a large paving job for a commercial company's shipping docks and parking lot. To perform this job, Action Paving chose to use their Marathon Equipment TPS250PT Hot Tack Sprayer to spray tack coat prior to paving.

milled parking lot

When parking lots age, they sustain damage by oxidation, water infiltration, crumbling or sinking, cracking, warps or potholes. It is essential to make sure your foundation is solid and intact before repaving your lot.

Once the parking lot has been milled and cleared of debris, Action Paving used their Marathon TPS250PT Hot Tack Sprayer to spray CSS-1H, a slow setting asphalt emulsion designed for use as a tack coat, and formulated with a harder base asphalt (lower penetration) than CSS-1. CSS-1H emulsions are used for a variety of purposes. Slow setting emulsions are the most stable of emulsions and generally can be diluted with water and mixed with mineral fillers and aggregates.

Action Paving towed their Hot Tack Sprayer along the milled section of the pavement, spraying the asphalt emulsion to create a bond to adhere a fresh layer of asphalt to a lower level of pavement.

Once they were able to lay a fresh coat of asphalt emulsion to the parking lot, Action paving was able to proceed with laying down a fresh level of asphalt to finish their paving process.

TPS115PS

Tank Capacity 115 Gallons
Burner Type Propane
Frame Type Skid Mount

Current Tab: Overview