DF10W
Direct Fired Asphalt Melting Kettles
Direct Fired Asphalt Melting Kettles
- Crack Sealing
- Roofing
- Joint Sealing
CASE STUDY
Right Seal Inc Residential Crack FillingCR300K
Pavement Crack Routers
Pavement Crack Routers
- Crack Sealing
- Utilities
UCMK130PT
Oil Jacketed Melting Kettles with Gravity Pour Delivery System
Oil Jacketed Melting Kettles with Gravity Pour Delivery System
- Crack Sealing
- Joint Sealing
- Foundations
- Utilities
- Roofing
- Bridges
KERA180BRE
Oil Jacketed Melting Kettles With Heated Hose And Wand
Oil Jacketed Melting Kettles With Heated Hose And Wand
- Crack Sealing
- Joint Sealing
HAL
Hot Air lance
HMT4000ODL
Hot Mix Transporter
Hot Mix Transporter
- Patching
CASE STUDY
Property Stars Asphalt Repair Job
BID SPECS
Bid Specifications HMT4000ODL Bid Specifications HMT8000ODLHEPR36
Portable Infrared Asphalt Heater
Portable Infrared Asphalt Heater
- Patching
CASE STUDY
Not Available
PAS70G
Power Asphalt Sprayers
Power Asphalt Sprayers
- Sealcoating
- Foundations
CASE STUDY
Not Available
DPS9
Sealcoat Applicator
Sealcoat Applicator
- Sealcoating
CASE STUDY
Not Available
MM250DT
Mastic Mixers
Mastic Mixers
- Patching
- Utilities
- Bridges
CASE STUDY
Not Available
MD12
Mastic Dispenser
Mastic Dispenser
- Bridges
CASE STUDY
Not Available
PPES10
Cold Tack Sprayers
Cold Tack Sprayers
- Tack Spraying
CASE STUDY
Not Available
TPS115PS
Tube Fired Hot Tack Sprayers
LD600PT
Tube Fired Insulated Hot Tack Distributors
Tube Fired Insulated Hot Tack Distributors
- Tack Spraying
CASE STUDY
Not Available
KEB115PT
Under Fired Hot Tack Kettles
27hp Crack Router
Marathon’s pavement crack router is essential in pavement preservation to create a uniform, clean edge for sealant to adhere to when crack sealing. The machine’s center of balance over the blades is unmatched in the industry, which makes routing easier and less strenuous for the operator.
27hp Crack Router with Dust Collection
Dust collection routing is the safest way to route cracks in pavement. The efficient dust collection system runs off the 27HP Kohler motor keeping dust and debris out of the air. As the industry looks to improve safety standards, dust collection may be an essential addition to your operation.
10 gal Direct Fired Asphalt Melter
The DF10W is a walk behind hot pour crack filler melter and dispenser. Equipped with an 80,000 BTU propane fired hand torch, the melter comes with everything you need to start crack sealing. This unit is commonly used in tandem with a larger gravity pour kettle such as a UCMK to apply material on any pavement surface.
30 gal Direct Fired Asphalt Melter
The DF30 is a 30 a gallon crack sealant melter with a gravity pour valve for dispensing into an applicator. This unit is a perfect size for utility trailer and can speed up a crack filling job. The DF30 has an air jacket, which means direct fired sealants are required.
100 gal Direct Fired Asphalt Melter
The largest air jacketed kettle, the DF100PT melts and agitates up to 100 gallons of direct fired crack filling material. Designed to be paired with a DF10W walk behind dispenser or pouring cone, the DF100PT will take your crack filling capabilities to the next level.
Hot Air Lance
The Marathon Hot Air Lance is a high velocity lance that will easily dry moisture from the pavement. Heating and cleaning the cracks in preparation of crack sealing allows for more sealant to bond to the surface of the crack. This will reduce the chances of vehicle traffic pulling the sealant from the pavement, extending the life of your repair.
180 gal Melting Kettle with Electrically Heated Hose and Wand
This asphalt crack sealing kettle uses an electrically heated hose to melt and apply blacktop crack filler effortlessly. The oil jacket surrounding the material vat ensures fast and even heating through the material. The 180-gallon material vat is ideal for large parking lots and municipal crack sealing jobs.
270 gal Melting Kettle with Electrically Heated Hose and Wand
This asphalt crack sealing kettle uses an electrically heated hose for effortlessly and quickly applying crack sealant to roadways. The oil jacket surrounding the material vat ensures fast and even heating through the material. The 270-gallon material vat is ideal for municipal roads and highway crack sealing jobs.
370 gal Melting Kettle with Electrically Heated Hose and Wand
Marathon’s gravity pour kettle is equipped with an oil jacket that encases the material vat to ensure even heat distribution and insulate any hot rubber material. The melted rubber is dispensed into a material applicator such as a pouring cone or DF10W. A 370-gallon kettle is ideal for high production crack filling operations.
27hp Concrete Router
Equipped with a diamond tipped blade, Marathon’s concrete router is designed to cut cement surfaces with precision and ease. The RCR300K is the perfect machine for any utility project that requires clean cut edges to provide access beneath a concrete surface.
130 gal Gravity Pour Melting Kettle
Marathon's gravity pour kettle is equipped with an oil jacket that encases the material vat to ensure even heat distribution and insulate any hot rubber material. The melted rubber is dispensed into a material applicator such as a pouring cone or DF10W. The 130-gallon capacity is an ideal size for asphalt crack sealing on parking lots and roads.
230 gal Gravity Pour Melting Kettle
Marathon’s gravity pour kettle is equipped with an oil jacket that encases the material vat to ensure even heat distribution and insulate any hot rubber material. The melted rubber is dispensed into a material applicator such as a pouring cone or DF10W. The 230-gallon capacity is an ideal size for asphalt crack sealing on parking lots, roads and highways.
370 gal Gravity Pour Melting Kettle
Marathon's entry level oil jacketed gravity poured dispensing kettle. The UCMK has an oil vat that wraps around the material vat to both insulate the material and reduce heat up times and ensure material is heated gently and evenly. The material is dispensed into an material applicator such as a pouring cone or DF10W. The 370-gallon material vat is an ideal size for asphalt crack sealing on roads and highways.
115 gal Under Fired Hot Tack Kettle
Marathon's KEB115PT provides a fast and reliable means of heating and applying petroleum derived asphalt cement through a gravity pour valve. This model is heated by an efficient propane burner with an assisted safety shut off valve. This machine is commonly used for any project that requires additional liquid asphalt such as AC-20 on site for bonding purposes.
260 gal Under Fired Hot Tack Kettle
Marathon's under fired hot tack kettle provides a fast and reliable means of heating and applying liquid asphalt cement such as AC-20. It also has an optional power spray system that can be used to distribute liquid asphalt cement to create a strong bond on a newly paved seam.
500 gal Under Fired Hot Tack Kettle
Marathon's largest under fired hot tack kettle provides a fast and reliable means of heating and applying liquid asphalt cement. The KEB500 is available in both propane and diesel fired models. It also has an optional power spray system that can be used to distribute liquid asphalt cement to create a strong bond on a newly paved seam.
Power Asphalt Sprayer
This portable sprayer is designed to dispense waterproofing and foundation coatings from an external container such as a barrel or a tote. Equipped with a 100' hose and 5' spray wand, the operator can navigate through a construction site with ease.
70 gal Power Asphalt Sprayer
The PAS70G has been designed perfectly for spraying residential driveways. The PAS70 was specifically designed to fit under the Tano cover of a pickup truck. The machine comes with everything you need and has 70 Gallons of capacity this machine, more than enough material to spray multiple driveways.
115 gal Power Asphalt Sprayer
The PAS115 is capable of transporting and applying foundation coatings for waterproofing and concrete primers. Using a light 5' spray wand with 100' high pressure material hose, the operator can navigate around a work site with ease. The material tank holds 115 gallons of material.
130 gal Gravity Pour Melting Kettle
Marathon's entry level gravity pour kettle is equipped with an oil jacket that encases the material vat to ensure even heat distribution and insulate any bituminous waterproofing material. Typically, a bituminous coating material is melted in the UCMK to be applied before a waterproof membrane is applied.
230 gal Gravity Pour Melting Kettle
Marathon's mid-size gravity pour kettle is equipped with an oil jacket that encases the material vat to ensure even heat distribution and insulate any bituminous waterproofing material. Typically, a bituminous coating material is melted in the UCMK to be applied before a waterproof membrane is applied.
370 gal Gravity Pour Melting Kettle
Marathon's largest gravity pour kettle is equipped with an oil jacket that encases the material vat to ensure even heat distribution and insulate any bituminous waterproofing material. Typically, a bituminous coating material is melted in the UCMK to be applied before a waterproof membrane is applied.
Our Machines
In Action
Canadian Property Stars
Hot Box Case Study
David from Canadian Property Stars recently expanded his business model to focus on hot asphalt repairs after he saw an increase in demand for these repairs. David has invested in a few Marathon hot boxes to tackle large scale cut and patch work or filing up emergency potholes. Check out David's review on the Marathon Hot Box and how this unit has made the process easy and affordable for his clients.
Watch The VideoFine Line Markings
Bridge Joint Repair
The CR300K asphalt crack router was a critical component of the bridge deck maintenance project. By effectively cutting and preparing the cracks in the asphalt surface, the router created a more secure and stable base for the crack-sealing material to adhere to, resulting in a stronger and longer-lasting repair.
Read The ArticleElite Waterproofing
Case Study
Since they wanted to perform a high-quality job without equipment issues and as quickly and efficiently as possible, they chose to use two variations of our Marathon Equipment Inc. hot rubber waterproofing kettles which they already had in their fleet of waterproofing equipment - the UCMK130PT & UCMK370PT.
Read The Article6ixview Asphalt Services
Crack Sealing Case
Study
6ixview Asphalt Services Inc. is an up-and-coming but thriving asphalt service business based out of Markham, Ontario, Canada. They were recently tasked with routing and sealing the fresh asphalt cut out road repairs in the Raymerville - Markville East neighborhood.
Read The ArticleServices & Products
Training & Support
Marathon has a dedicated customer support team to assist with any questions regarding our equipment. We offer in-person training to ensure that your workforce is properly educated on the safety and operation of all equipment.
Contact UsReplacement Parts & Tools
Marathon’s parts department is ready to provide any replacement parts required to keep your operation running. We also offer a large catalogue of specialized tools at competitive prices. Contact us to find out why our customer service is second to none in the industry.
View Parts PageMaterials
Marathon is an official distributor of Maxwell Products, a manufacturer of high-quality pavement preservation products. Contact us to find out why Maxwell’s crack sealant and mastic are revolutionizing the industry!
View Materials PageWe Are
A leading name in the manufacturing of quality road maintenance equipment, tools and specialties.
Made in Canada. Distributed
across North America and Worldwide.
Our Story
Marathon has long been recognized as a leading name in the manufacture of quality hot mix asphalt
maintenance equipment,
tools and specialties.
Our line of liquid asphalt equipment is also widely used for waterproofing, concrete foundation
coatings, bridge deck
rehabilitation and commercial roofing.
We've designed, built and distributed all manner of heavy-duty equipment needed to repair and
maintain municipal roads,
highways and other asphalt or concrete surfaces such as airport runways, bridges and parking
lots.
Rest assured, we can provide you with the right tools, products and service operations fleet for
crack sealing, pothole
repairs, tack spraying, driveway and parking lots sealing equipment from our factory in
Burlington, Ontario. After all,
we've been doing it successfully for generations of road repair businesses, DOT's,
municipalities and small to large
contracting businesses.